Air Cooled Scroll Chillers

I FLO and I NOC Scroll Chillers

Both these types of chillers make use of untreated, dirty water as a cooling media and contain a shell and tube type evaporator. The I FLO contains R 407C as a refrigerant and works in conditions up to 45°C, while the I NOC uses R 134a in conditions upto 55°C. These chillers are used in applications in the fields of plastics, food and beverages, chemicals and pharmaceuticals, textiles, brewery, cement and concrete batching.

Werner Finley

Apart from the pre-installed standard components, all the scroll chillers can be fitted with additional components, allowing them to be customised to a specific need and benefit its application with greater accuracy. The available add-on features include a flow switch or indicator, flow meter, remote control panel, energy meter and audio-visual alarm. One can choose the chiller most suited to their target application and further customise it to fit their needs.

I FLO and I NOC Scroll Chillers Specifications


  • Cooling capacity range : 1.75 kW to 1050 kW
  • Fluid : Soft Water / water + glycol solution
  • Refrigerant : R407c / R134a
  • Operating ambient temperature range : +10 to + 50C
  • Best fluid outlet temperature : 15degc, At ambient : 35degc & ∆T : 5 Deg C
  • Condenser Type : Air-Cooled, Fin & Tube
  • Evaporator Type : Brazed Plate Heat Exchanger
  • Operating environment : Indoor / Out door - Shelter from rain, dust, insects, humidity, sunlight
  • Power supply : 1 PH / 3 PH, 220V / 415 V, AC, 50/60 HZ
  • MOC of wetted parts : SS 202 / 304 / 316
  • Fluid loop : Open loop with media tank in the circuit
  • Noise level : < 85 db
  • Life expectancy : 10-15 years
Design Inputs from Customer
  • Required cooling capacity in kW
  • Required / rated flow rate of cooling liquid
  • Max liquid leaving temperature from cooling unit, at max ambient temp.
  • Increase in liquid temperature at outlet of inverter
  • Operating ambient temperature range (+/-)
  • Installation site environmental conditions
  • Power supply - voltage, frequency, phase.
  • Electrical control logic
  • Type of configuration for the cooling system
  • Acceptance test, applicable standards and certifications

  • Our Applications

      Solar and Wind Energy, Health Care, Data Center, Power Electronics, Machine Tool, Induction Heating, Welding, Hydraulic Oil Cooling, Paint Manufacture, Pharma, Chemical, X-Ray Spectrometer, Vacuum Systems, Breweries, Food Processing, Plastic, Concrete Batching